Product Description

KIT6130: Thermostatic Pre-set Warm Water Bidet Shower Kit with auto prompt shut off valve and shower head with ceramic core slider trigger.

Thermostatic Pre-set Warm Water Bidet Shower Kit. This kit provides absolute peace of mind against accidental leakages, the water is always off  when the shower is docked in the valve. To turn water on to hose and shower the shower needs removing from the dock and the dock turned 90 degrees to the vertical position. After use to place the shower head back in the dock the valve dock needs turning back to the horizontal position thus closing the valve and shutting off the water supply.

The chrome on ABS CTV6180 Shower head is the worlds first and currently only shower head to utilise cermaic plates instead of runbber washers in the shower head trigger, it is also the first to employ a slider trigger which slices throught the water as opposed to pushing against the water pressure when operating the trigger, this enable the water flow from the head to be precisely and accurately controlled from a trickle to full flow with ease no matter how strong the water pressure. The thumb valve requires a certain level of thumb dexterity, please view a short video demondtrating the precise level of flow control by clicking HERE.

Water temperature is pre-set to the desired operating temperature at the time of installation. The TMV6200 is factory set at 38C we recommend reducing this setting to 35C for bidet showers. The temperature is adjusted by removing the cap and turning the brass head screw in the required direction indicted by the coloured temperature markers Kit consists of the following parts.

• CTV6180 Mirror Chromeed high Impact ABS shower head with high pressure ant- tangle hose.
• VAL2450 Auto prompt water shut off valve.
• TMV6200 Thermostatic Mixing Valve (not shown in main image)
• HOS-AT 1.2M stainless steel hose in chrome finish
• Water pressure:  Requires minimum 0.3 bar water pressure,maximum 4.5 bar